BJMBW - 01564 ALMAG OIL

  • MSDS: BJMBW
  • Manufacturer: TEXACO INC
  • Product Name: 01564 ALMAG OIL
  • National Stock Number: 9150-00-231-9054
Product Identification

Product ID:01564 ALMAG OIL
MSDS Date:12/19/1985
FSC:9150
NIIN:00-231-9054
MSDS Number: BJMBW

Responsible Party
TEXACO INC
BEACON, NY 12508-0509
US

Emergency Phone: 914-831-3400 EXT 204

Info Phone: 914-831-3400 EXT 204

Preparer: R. T. RICHARDS

Cage: 7B131

Contractor
TEXACO INC
509 BEACON, NY 12508-0509 US

Telephone: 914-831-3400

Cage: 7B131

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED LIGHT

CAS: 64742-53-6

RTECS: PY8036000

Fraction By Weight: 90-95%

ACGIH TLV: 5 MG/M3 (OIL MIST)


HYDROTREATED HEAVY NAPHTHENIC DISTILLATE, PETROLEUM

CAS: 64742-52-5

RTECS: PY8035000

Fraction By Weight: 11-20%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. AVOID BREATHING
OF MIST.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:IRRITATION OF EYES AND SKIN UPON CONTACT.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF SKIN AND
RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid

First Aid:EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL
ATTEN TION.

Fire Fighting

Flash Point Method:COC
Flash Point:265F,129C
Autoignition Temp:Autoignition Temp Text:UNKNOW
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS. MAY EVOLVE
ALDEHYDES, KETONES, CARBON MONOXIDE, AND OXIDES OF NITROGEN &
SULFUR

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT, ELIMINATE SOURCES
OF IGNITION, AND VENTILATE AREA AS REQUIRED. RECOVER FREE LIQUID.
ABSORB SMALL SPILL WITH INERT MATERIAL. PLACE WASTE IN DOT APPROVED
CONTAINER FOR DISPOSA L.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA AWAY FROM SOURCES OF IGNITION. KEEP CONTAINER CLOSED WHEN NOT
IN USE. PROTECT FROM PHYSICAL DAMAGE.
Other Precautions:AVOID BREATHING OF MIST. MINIMIZE PERIODS OF
EXPOSURE TO HIGH TEMPERATURE. AVOID WATER CONTAMINATION.

Exposure Controls

Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
EXPOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR AS
PER CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS AND
NIOSH-RESPIRATOR SELECTION.
Ventilation:MECHANICAL (GENERAL) VENTILATION IS USUALLY ADEQUATE.
Protective Gloves:RUBBER GLOVES OR OTHER OIL RESISTANT.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. INDUSTRIAL TYPE
WORK CLOTHING AND APRON AS REQUIRED TO AVOID PROLONGED OR REPEATED
CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING OR DRINKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
USE AIR-SUPPLIED RESPIRATORY EQUIPMENT IF EXPOSED TO HOT FUMES.

Chemical Properties

HCC:V6
Viscosity:6.2 CST @40C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT PALE LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE,
ALDEHYDES AND KETONES, AND OTHER COMBUSTION PRODUCTS OF NITROGEN
AND SULFUR.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.